Structural Engineering, Assessments & Design

Forensic engineering, structural assessments and design for existing buildings. Serving owners, buyers, associations and property managers in San Diego County and Orange County.

What you receiveSigned-and-sealed engineering reports, calculations or drawings for your assessment, inspection or design project
  1. FoundationMovement at the base shows up above it.

    A diagonal crack from a window corner, a door that no longer latches, a floor that slopes toward one wall: these are the usual signs of differential settlement. The assessment records where each one is, measures what can be measured, and says whether the pattern points to the foundation.

  2. FrameEvery load needs a path to the ground.

    Roof to beam, beam to column or bearing wall, wall to footing: the frame is the route the weight takes down. The assessment follows that route through what can be seen, notes where it has been cut or altered, and states what stayed hidden behind finishes.

  3. FacadeFinishes crack for more than one reason.

    Hairline cracks in stucco or plaster are often shrinkage. Wider or horizontal cracks, cracks that reopen after patching, and gaps opening at trim or ceilings can mean the wall behind has moved. The assessment separates the two as far as observation allows, and says so where it cannot.

  4. FinishIt ends with a report you can hand to someone else.

    A written engineering report, signed and sealed by a California-licensed Civil Engineer, documenting the agreed scope, observations, professional opinion, recommendations, and limitations.

    What the report contains
  5. Buildyneer answers one question about one structure, in writing. A property purchase, a crack that appeared, a wall that moved: we agree on the scope, visit, document and explain what the assessment does and does not establish.

    How it works
  • Agreed scopeScope, fee, deliverables and timing are agreed before work begins.
  • Property information reviewedExisting conditions, available plans and other relevant information reviewed for the agreed work.
  • Defined deliverablesAn engineering report, calculations or drawings, as agreed in the scope.

Structural Engineering & Assessment Services

View all services
A single crack running down a white rendered wallFor an existing concern

Cracks & structural concerns

Visible movement, cracking, deflection, foundation concerns or a specific structural component.

Scope agreed firstMeasurementsWritten report
Read more about cracks and structural concerns
Masonry retaining walls supporting raised garden terraces above a lower lawnFor retaining walls

Retaining wall assessments

Visible distress or movement in an existing retaining wall and what may need further review.

Scope agreed firstSite visitWritten report
Read more about retaining wall assessments
Illustrative residential building exteriorFor condominium associations

Balcony & deck inspections: SB 326

Inspections of qualifying condominium balconies, decks and other exterior elevated elements maintained or repaired by the HOA.

Eligibility reviewInspectionEngineering report
Read more about balcony and deck inspections: sb 326
Illustrative residential building exterior at duskFor apartment owners and managers

Balcony & deck inspections: SB 721

Inspections of qualifying balconies, decks and other exterior elevated elements in apartment buildings with three or more dwelling units.

Eligibility reviewInspectionEngineering report
Read more about balcony and deck inspections: sb 721
Engineer drawing a structural detail with a scale rulerFor alterations and repairs

Structural design for existing buildings

Engineering for wall removal, beams, headers, foundations and retaining walls, with calculations and drawings for the agreed work.

Defined design scopeCalculationsDrawings
Read more about structural design for existing buildings

Photography is illustrative stock, not company projects.

From your first message to your completed report or design.

  1. Tell us about your projectShare the property location, your structural concerns or proposed changes, and your preferred timing.
  2. Agree on the scope and feeWe confirm the services, required information, site access, deliverables, fee and anticipated schedule.
  3. Assessment, inspection or designWe complete the site observations, inspections, engineering analysis and design needed for the agreed work.
  4. Receive your report or design packageReceive a signed-and-sealed engineering report, calculations or drawings, with findings, recommendations or design details appropriate to your project.

Scope, fee, deliverables and timing are agreed before work begins.

Request a consultation
What you receive

Engineering reports and design packages tailored to your project.

Your deliverables depend on the service and agreed scope. Assessments and inspections include a written engineering report. Design services may include engineering calculations, drawings or both, depending on the project. Final engineering documents are signed and sealed by a California-licensed Civil Engineer.

Engineer drawing a structural detail with a scale ruler

Assessment & Inspection Reports

  • Purpose and scope of the assessment or inspection
  • Property information and relevant history
  • Site observations, measurements and photographs
  • Engineering findings and professional opinion
  • Recommendations and next steps
  • Limitations and any need for further investigation
  • Additional reporting required by applicable inspection laws

Structural Design Packages May Include

  • Design criteria and assumptions
  • Engineering calculations for the agreed work
  • Structural drawings and construction details
  • Applicable material specifications and design notes
  • Permit-review responses, where included in the scope

Your proposal identifies the documents and services included. Repair design, additional investigations and permit-review support are included only when expressly stated in the scope.

About Buildyneer

Forensic Engineering, Structural Assessments & Design

BUILDYNEER helps property owners, buyers, condominium associations and property managers understand structural concerns and plan changes to existing buildings. Services include building condition assessments, investigations of cracking and structural movement, retaining wall assessments, SB 326 and SB 721 balcony inspections, and structural design for alterations and repairs.

The practice is led by a professional engineer who holds bachelor’s and master’s degrees in Civil Engineering, with a focus on Structural Engineering at the master’s level, and is licensed as a Professional Engineer in California, Arizona, Texas, Florida, Pennsylvania, Georgia, North Carolina and New Mexico.

We turn engineering findings into clear explanations and practical recommendations. Depending on the agreed scope, deliverables include signed-and-sealed engineering reports, calculations or drawings to help clients understand existing conditions, plan repairs or move forward with proposed modifications.

LicensureLicensed civil engineer, California
Location and service areaBased in San Diego County, California. Serving San Diego County and Orange County.
EntityBuildyneer
Exterior of a wooden house
Illustrative stock photo, not a Buildyneer project.

Based in San Diego County, California. Serving San Diego County and Orange County.

Share the property location and the work you have in mind. Access, availability and travel are confirmed when we agree on the scope.

San Diego CountyOrange County

Questions people ask first.

Not sure which service you need? Tell us about your property, concern or proposed changes.

Is this the same as a general home inspection?

No. The service focuses on structural conditions within an agreed scope. It does not replace a general home inspection covering other property systems.

Can I ask about one specific wall or component?

Yes. A specific concern can be handled as a focused assessment. The property, access and available information determine the appropriate scope.

What should I include in my request?

The property address, the concern and your preferred timing. Existing reports or photographs can be discussed after the first review; nothing needs to be attached to start.

Will the assessment include repair design?

Repair design and engineering packages for existing buildings are available under a separately agreed scope, including calculations and drawings. An assessment does not automatically include design. Construction is carried out by a separately engaged contractor.

How much does an assessment cost?

The fee depends on the concern, the property, travel and the report required. Scope is discussed first so the fee and deliverable are clear before booking.

Start with your property.

Tell us what you would like assessed, inspected or designed. The next step is a conversation about suitability, scope and a quote.

Based in San Diego County, California. Serving San Diego County and Orange County.

  1. 01We review your requestFit, access and the decision you need to make.
  2. 02You receive a scope and quoteBefore any site visit is booked.
  3. 03Assessment, inspection or designReports, calculations or drawings as agreed in the scope.
Buildyneer(619) 800-4344
Request a consultationAll fields are required.
Full Address